Furnace Repair in Salt Lake City

When the cold months arrive, the furnace provides warmth in our homes. The last thing we want to happen is for it to break down, especially right in the middle of the winter season. If you need information regarding furnace repair in Salt Lake City, UT, this article can help you.

Before we delve into the discussion as to the common problems in furnaces, let’s look at its inner workings. A typical furnace resembles a tall, rectangular, metal box that contains the following:

  • Air filter
  • Thermostat
  • Gas burner
  • Circulating fan or blower
  • Draft fan
  • Flame sensor

Heating the air using a furnace is pretty straightforward. The cold air passes through the air filter and is then heated by the gas burner. The warm air is then circulated in the room using the circulating fan.

furnace-repair

Common Furnace Problems

You can easily tell if your furnace is not in good working condition. To start off, simply check if its flame is continuous and full; if not, you will likely have problems. A sputtering flame will not generate enough warmth.

Problems occur in its parts. When you notice reduced heat, pay attention to the burner and air blower. Any malfunctions of these components can affect the overall performance of the instrument.

Also, check for leaks in the furnace. If you smell gas near the furnace or your gas pipeline, this suggests that you have a leakage problem. To determine the exact location of the leak, mix 1 cup of water with a teaspoon of detergent. Splatter it on the gas supply pipeline, connections, valves, etc. This soapy solution will fizz or bubble at the area where the gas is seeping out. For leaks caused by loose connections, simply tighten the fixtures or apply a sealant to its surface. Occasionally, some gas line teflon tape to keep connections tight. Should any furnace problem persist, call the professionals. When you need reliable furnace repair in Salt Lake City, UT, get in touch with our technicians here at ESCO.

Not Producing Enough Heat

There are only three main reasons why a furnace might not produce enough heat. First, check if the thermostat is set on low; this can be easily remedied by changing the setting to its desired level. Second, there could be a breakdown in the instrument’s thermostat or the fuse may have blown.

Third, the problem could also be because of the accumulation of dirt in its filter or burner. Dirty filters are quite common. Sometimes the furnace flame sensor will get dirty from dust, or more often, carbon buildup. If you are not familiar with the device, it will be best to seek help with your furnace repair from our ESCO technicians.

Taking Precautions Before the Cold Season

Do you want to ensure that your furnace functions properly through the fall and winter? Avoid the hassle of an unexpected furnace failure by calling a serviceman with the onset of fall. Our professionals can help you avoid hazards that can be caused by the mishandling of the unit.

Avoid the inconvenience from having a broken furnace. Protect yourself from disaster. When you need dependable furnace repair in Salt Lake City, UT, contact the ESCO specialists. Call 801.204.9444 today.